
"Can you repeat that?"
Every drive-thru team says it. The question is how often. When it starts happening every few orders, your speed of service and order accuracy are paying for it, one repeated order at a time.
Drive-thru audio problems are easy to live with. The team adapts. They lean closer, talk louder and confirm everything at the window. After a few weeks, the workaround becomes normal, and nobody calls it a problem anymore.
When audio quality drops, the first fix is usually behavioral: speak up, slow down, enunciate. It's a reasonable instinct. But in our service calls, poor drive-thru audio is almost always a component problem. A good crew working around a bad system loses seconds on every order, and works harder to do it.
There's a second cost that's easy to miss. When the crew compensates by talking louder and asking customers to repeat themselves, the customer experience changes too. Guests at the order point feel rushed or unheard, and orders taken over bad audio are more likely to be wrong at the window. That shows up later as remakes, refunds and complaints, none of which get traced back to a speaker post.
The useful question isn't "who's struggling?" It's "what does it sound like?" Different symptoms point to different causes. Here's how Carolina Georgia Sound (CGS) technicians sort them.
What it sounds like: Steady background noise on one or more headsets, sometimes with crackling when the person moves.
Likely causes: A worn or damaged headset cable or boom mic, a low battery, or interference. If it's on one headset, start with that headset. If it's on all of them, the cause is more likely at the base station or the order point.
Check first: Swap headsets and batteries. If the noise follows the headset, you've found it.
What it sounds like: The crew hears the customer, but the customer can't hear the crew, or the reverse.
Likely causes: A specific part of the signal path, usually the order point speaker or microphone, or a setting that changed. Because one direction works, the system is partly working, which narrows things down a lot.
Check first: Confirm nobody changed the volume settings. Then try a different headset. If the problem stays with the lane and not the headset, it's time for a technician.
What it sounds like: The crew hears their own voice coming back, or there's a squeal on the line.
Likely causes: Volume levels set too high, the order point microphone picking up its own speaker, or settings that changed after a repair or adjustment.
Check first: Ask whether anyone has adjusted the volume recently. Note whether it happens on every car or only some.
What it sounds like: Words drop. The conversation cuts out mid-order, sometimes only in certain spots or at certain times.
Likely causes: A failing battery, a headset at the edge of its range, interference, or an intermittent connection. If it happens in specific spots in the kitchen, range or interference is likely. If it happens on cold or wet days, look at exterior connections.
Check first: Note where the crew member is standing and when it happens. That detail saves a technician real time, because intermittent problems are often gone by the time someone arrives on site.
What it sounds like: The crew can tell someone is talking but can't make out the order. Engines, traffic and wind come through louder than the customer.
Likely causes: A blocked, damaged or aging order point microphone, or settings that no longer match the conditions at that lane.
Check first: Clear the speaker post grille of debris. Then place a test order from your own car and listen from a headset.
What it sounds like: The whole team loses audio together.
Likely causes: The base station, power or another central component. This isn't a headset problem.
Check first: Confirm power and make sure nothing was unplugged or reset. Then call for service. This is the one that stops the drive-thru.
| Symptom | Start by checking | Call a technician when |
|---|---|---|
| Static or hiss | Swap headset and battery | It’s on every headset |
| One-way audio | Volume settings, different headset | It stays with the lane |
| Echo or feedback | Recent volume changes | It continues after settings are reset |
| Cuts in and out | Battery, where and when it happens | It’s tied to weather or a fixed location |
| Customer too quiet | Speaker post grille, test order | Clearing debris doesn’t fix it |
| All headsets down | Power, anything unplugged | Right away |
None of these steps require a technician. Together, they turn "the drive-thru sounds bad" into a specific symptom with a likely cause, which is usually the difference between a quick fix and a long service call.
Has Your Team Been Working Around an Audio Problem? Let's Find the Cause.
CGS serves QSR operators across Georgia, South Carolina, and Ohio. Static, echo, one-way audio and dropouts each point to a different cause, and a technician can trace it faster when you can describe the symptom. Bring your notes on which headset or lane, the time of day, and the weather. Contact us and we will help you find the cause.
About the Author
Written by Grant Wycliff, President of CGS. Grant works with QSR operators across Georgia, South Carolina, and Ohio on drive-thru systems, preventive maintenance, and full-stack technology service. CGS is a commercial AV and technology integrator with 35 years of experience serving QSR operators, retail, hospitality, and commercial businesses. Connect with us on LinkedIn.

Fill out this form to schedule a call or in-person meeting.